Water Savers Bangalore

Water Misting System Manufacturer and Supplier in Bangalore

WaterSense is a leading manufacturer, supplier and integrator of water misting system, fogging system and mist cooling system in Bangalore, Karnataka. We have installed our misting system to various industrial units, commercial units and Homes throughout Karnataka including cities like Mysore, Chamaraja Nagar, Belgaum and Hosur (Tamil Nadu).

Misting systems use evaporated cooling mechanism and it works perfectly in dry weather conditions. They work averagely in humid weather conditions and can reduce dust, odors and static electricity, as well as flying insects such as Mosquitoes, Bugs etc. It also helps to regulate and maintain humidity for Plants, Greenhouses, Homes, Atrium, Courtyards, Patios, Hotels, Restaurants, etc.

Three types of Misting / fogging systems are available.

  • Low-Pressure misting system
  • Mid Pressure misting system
  • High-pressure misting system
Misting or Fogging Systems offers a dynamic solution by creating a visual fog that makes it seem and feel like you are in a hill station in the middle of summer. When attached to high-pressure pumps, water is forced through nozzles, forming droplets that evaporate into mist as they reach the outdoor atmosphere. This can thereby reduce the temperature by up to 12 degrees Celsius. When the misting system is placed in a confined indoor area, it will not only provide a cool-mist but also increase humidity.
 
Necessary knowledge is required before selecting the right misting system for the right purpose. We will guide you through the options available.
spray is fine enough to cool you in a hot and dry weather, it is less likely to get you wet and can also provide more cooling than a Low-pressure system. A simple solution to prevent wetting and to keep humidity levels down, a recycle timers can be incorporated, this timer makes the pump run for example, 2 minutes and then shuts off for 3 minutes and then starts up again in cyclic mode.
 
A High-Pressure system will give the maximum cooling compared to any misting system available as it works with pressure above 35 bar, even in areas with high humidity, without getting anything wet. Our systems are designed to produce very fine mist which will give you enough cooling to make it feel like a regular winter’s day. High grade Nylon High Pressure tubes with SS connectors and Nozzle make up part of this system, which provide the best output as well as long life in terms of usage. Misting systems over 35 bar are known as a high pressure misting systems and its maximum efficiency can be achieved around 55 – 80 bar (800 – 1200 psi). 
 
As with all mist systems, each and every component must be rated to work within the same range of water pressure.
Medium and High-Pressure systems use pumps to increase the water pressure from any water or gravity-fed source that already has some water pressure, or a ground source such as a pond or tank with still water that has no pressure. They can be used in all places that require good, natural – like cooling. Example: Venues, Auditoriums, Indoor and outdoor cooling, Sports arenas, Outdoor work areas etc.
 
Different misting systems includes
  • OUTDOOR MIST COOLING SYSTEM
  • INDOOR MIST COOLING SYSTEM
  • DUST SUPPRESSION SYSTEM
  • MISTING SYSTEM FOR HOMES AND GARDEN
  • ANIMAL COOLING MIST SYSTEM
  • MISTING SYSTEM FOR AGRICULTURE
  • INDUSTRIAL MISTING SYSTEM
  • RESTURANT MISTING SYSTEM
  • MUSHROOM FARMS
  • COW SHEDS
  • INDUSTRIAL MISTING SYSTEM 
  • INDUSTRIAL ODOUR CONTROL MISTING

iindustrial misting and fogging system | misting system manufacturers | fogging system supplier | high pressure misting system in bangalore